: | Jan 17, 2005 |
![]() |
![]() |
![]() |
. |
Raise and support the vehicle. |
. | Remove the wheel and tire. |
. |
RH side only: Disconnect the brake pad wear indicator sensor. |
. | Remove the brake caliper lower bolt. ![]() |
. | Remove the brake pads.
![]() |
. |
Clean the caliper housing and anchor plate using brake cleaning fluid. |
. | Inspect the caliper piston and slide pin seals for damage. |
. | Position a bleed jar containing a small quantity of approved brake fluid. Connect the bleed tube to the bleed screw and loosen the screw. |
. | Press the piston into the caliper housing.
|
. | Disconnect the bleed tube and remove the jar. |
. | Install the brake pads.
|
. | Rotate the brake caliper downwards.
|
. | Connect the brake pad wear indicator sensor. |
. | Repeat the above procedure for the other side. |
. | Install the wheels and tires.
|
. | Depress the brake pedal several times, check the fluid level in the brake fluid reservoir and top up with brake fluid if necessary. |